Feeding & Passaging Real World
Feed and passage the cultures on the workcell, with operator checks and microscope review at the required steps.
Protocol videos
STEMCELL Technologies protocol demonstrations. Watch on YouTube
Task & tools
Who does what
Required settings before a physical run
Operator Context
This physical workflow has no delivered agent prompt or assessed run. These are its published operator protocol and supporting definitions.
Open Operator Context to read the files.
Protocol
1 · Set up the run
2 · Maintenance feeding
3 · Passage into a new plate
Squid image requirements
When the physical workflow is complete
Rubric
Pass / fail checks
- Green tags identify rules drawn from the scientist session; apply the approved recipe selected for this physical run.
- After a reviewer-directed stop, mark collection, mixing, dilution, seeding and new-plate registration as not required; still record plate disposition and ongoing maintenance.
Runs & evidence
No physical run assessed
There is no instrument execution or physical pass/fail evidence attached to this protocol.
QC & findings
Draft · required settings unresolved
Use the required settings under Task & tools to select the approved recipe before an actual run. Simulator checks do not establish hardware readiness.
Sources & limits
Protocol sources and differences
This page defines operator/instrument responsibilities and source-grounded checks. It does not operate the robot or microscope.